PSH-1 Build

[McCreed]

Ahh, I didn't know the shellac was tinted. That makes sense.
Look forward to seeing the result!

If you happen to be using oil based poly and alcohol based dye (presumably so if tinting the shellac) you can also just tint the poly to cover sand-throughs then go over it with clear poly to get your top coat. Kind of same same, but I thought I'd mention it!

[vivek_rc]

Ahh, I didn't know the shellac was tinted. That makes sense.
Look forward to seeing the result!

If you happen to be using oil based poly and alcohol based dye (presumably so if tinting the shellac) you can also just tint the poly to cover sand-throughs then go over it with clear poly to get your top coat. Kind of same same, but I thought I'd mention it!

That’s a good tip about tinting the poly, might give it a try. Below is where I am at…