Ahh. I am an idiot. I think I see what I did. The diagram from pit bull page for the GR-1SF…Since the pickups in the picture are facing up (and the pots are in the same places as when viewed from front of the guitar) I thought you had to flip the pots and switches right side up and then the leads would be in different order. So…basically I have to view the number of the pot leads as if I was looking down from the top. So I mistakingly my made all my first leads my third leads! Right? Just switch all my 1’s and 3’s. I will have to rewire all those flips
My pot leads are not long enough to bend back to touch the pots so those short black wires are there to just jump to ground to the pots (of course, from my mistake above) they are all on wrong side now). And I see that the third lead on the master tone pot does NOT need the ground back to the pot.
Reply With Quote