Quote Originally Posted by Simon Barden View Post
If you can get the strings just touching the frets at minimum height, you should be fine.

Also, your height comparison pics have all been on the bass side. You’ll want a lower action on the treble side and there is probably a very slight neck twist. Not enough to affect playing but it can lead to an imbalance in action heights between the treble and bass sides with the bridge fully lowered, so check both sides of the neck.
[mention]vivek_rc [/mention] - check out my build diary I have put a photo of my action I achieved with a 1.5mm shim and lowering my bridge as much as I could. With the nut lowered too i cannot get the strings touching the frets but it is acceptable and similar to my prs so happy non the less. It would be good to have a bit more adjustment but the kit is not going to make this possible.


Sent from my iPhone using Tapatalk