Quote Originally Posted by mrpearson View Post
Vivek. I have set my neck with my 1.5mm shim and pretty sure my action is ok now. Remember the kit bridge is a few mm higher than the you have order (it is huge)

I also slightly recessed the bridge post opening with a bit of sandpaper so the bridge posts are flush with the body. (Install these today and they look awesome). With my bridge mounted I can run a straight end from the low e saddle across the 1 fret and 22nd with pretty much very minimal gap at the 22nd fret.

Once I lower my nut during setup I reckon I will be raising my bridge up to get the correct action.


Sent from my iPhone using Tapatalk
Hey mrpearson, thanks for the advice, will wait to install the new bridge once it arrives and check how the 1mm shim I’ve made alters the action.