Quote Originally Posted by McCreed View Post
Can you elaborate please? I'm having trouble completely understanding the issue (the "rock back on forward" is what's confusing me).

If it's just one fret that's too low, you buy some suitable fret wire and just replace it. Then level the one new fret to match the adjacent ones.
Another option, which is way extreme IMO, is re-level all the frets to accommodate the low one. This would be a last resort though. There may be other options but I need to understand the problem better.
Re. Rocking. Had a straight edge and a fret rocker tool which were not sitting flat and pressing down on one end it would rock which lead me to believe there was a high fret as the first fret was lower than the rest. I think that my lowering the other frets I have taken too much off the top of a whole bunch of frets. I now cannot get nice round top on the fret with my crowing tool. To be honest installing fret wire is out of my comfort zone if this is the fix.


Sent from my iPhone using Tapatalk