I've started the painful job of trying to flatten over the decals. They were raised quite a bit, in no small part due to the couple of layers of polyurethane I sealed them with. They're now reasonably flat, though I've still got a ways to go to build up the layers to get them all flat. The rest of the body and neck has had a stack of coats and the last sand was wet @ 800 grit. I'm kinda keen to see if I can make them vanish under the tru-oil before I go over the whole thing with 1200 and whatever higher grits I've got before I give it a week to harden before polishing. I don't have a lot left of that bottle, so I need to start rationing a bit. It's overall pretty glossy looking.