I let it dry for a day or two. It looked slightly better when it was dry. I then sanded it back a bit and applied more coats. In hindsight, I should have sanded a bit heavier and just got it back closer to the primer and rid of more of the paint runs. I was presuming that the later coats would fill it in a bit more. That didn’t really happen.
It did look a little more uniform, though.
Next was the clear coat layers. Again, it was splotchier and orange peelier than I’d like. I just had to let this gas off for a few weeks before I could sand and polish it.


Timbah First Bass by Tim Gill, on Flickr
Timbah First Bass by Tim Gill, on Flickr
Timbah First Bass by Tim Gill, on Flickr