Okay, so the installation of the new 1Tb SSD in my new Acer Aspire 5 laptop went-off without a hitch, it's been roughly a year since I did the install and so far I have had no major issues with it whatsoever, the whole installation process was relatively easy to do, just undo some screws holding the bottom plastic cover of the laptop in place, then undoing one screw holding the stock 256Gb SSD in place before gently unplugging it from it's socket, to install the new 1Tb SSD it was a simple matter of plugging it into the socket, securing it in place with the small mounting screw, then re-attaching the bottom plastic cover with the rest of the screws, after that I booted the laptop up into it's BIOS (Basic Input Output System) screen to check if it recognized the new 1Tb SSD, it did, so I knew that was a very good sign, all I had to do was a clean-install of Windows 10, which gave me no problems, I did have to get Windows setup to do a format/partition, but after that the installation procedure continued as normal, and then my laptop booted normally into Windows 10.
Reply With Quote