Next build - another tele!

[Simon Barden]

Yes. I'd suggest something like this: https://smile.amazon.co.uk/C121GX1-4...%2C190&sr=8-10

Trend make decent quality router bits. I've found cheap Chinese sets are a waste of money, and the shafts tend to be slightly too small, so they slip in use and you end up with routs that get deeper as you progress.

Just check that the diameter of the cutting bit is small enough to fit the smallest radius of the pickup rout.

[Groovyman32]

Thanks both!

[Cliff Rogers]

Yes. I'd suggest something like this: https://smile.amazon.co.uk/C121GX1-4...%2C190&sr=8-10

Trend make decent quality router bits. I've found cheap Chinese sets are a waste of money, and the shafts tend to be slightly too small, so they slip in use and you end up with routs that get deeper as you progress.

Just check that the diameter of the cutting bit is small enough to fit the smallest radius of the pickup rout.

Here in Oz, have a look at the TruaCut ones on eBay Oz.