P 90 and humbucker Coil split

[Rodc]

I don’t know of a diagram for this combination specifically, but if you can’t find one, you’d basically be taking the bridge pickup and vol/tone pot wiring from a 2 x humbucker w/ split diagram, and the neck pickup and vol/tone wiring from a 2 x P90 diagram. They both meet at the switch, so the switch and output jack wiring should be the same in both anyway.

Thanks Jon, I was looking at it again last night and was thinking the same after searching for a hour..🤦*♂️ Thanks for confirming..👍