So after an eternity Crimson finally delivered my stains and oils!
Dark green to yellow burst was decided on and after a few trial runs i went for it.

24 hours later i used the penetrating oil and as i rubbed it in i started to pull the stain. I did expect this so no biggie.
After 2 coats i moved to the high build oil and after about three thin coats the stain was still pulling and lightning the colour. I didn’t mind apart from it lifted the dark burst that was hiding the glue marks I couldn’t get out.

In Bens videos he did use the high build pretty liberally but as i have a paper thin veneer i didn’t want to use sandpaper just in case and thought multiple thin coats might work.

The pics are about 9 coats in.

Live and learn!






Sent from my iPhone using Tapatalk