When setting this guitar up I did all the right things measured from nut on neck to 12th fret and from 12th fret to where middle of saddle positions should be. (measure twice drill once!) So I will see how I go with shortening the springs or removing the offending ones all together. If that doesn't work I will move the bridge itself back a short distance. Attached pic to show the bottom e saddle wound all the way.
Originally Posted by SJDavis75
When setting this guitar up I did all the right things measured from nut on neck to 12th fret and from 12th fret to where middle of saddle positions should be. (measure twice drill once!) So I will see how I go with shortening the springs or removing the offending ones all together. If that doesn't work I will move the bridge itself back a short distance. Attached pic to show the bottom e saddle wound all the way.
ooo, I spy a hint of steam punk about this build. Curiosity piqued!
FrankenLab:
Turning tone wood into expensive sawdust since 2016!
Reply With Quote
