Greetings !
Update Body:
First, I did another mock build with the new bridge and checked the string alignment
–>everything is fine!
Then I wanted to check which treble/bass shield on the toggle switch Daron uses on his guitar and WHAT!
At a closer look, he has no toggle switch. He uses one tone pot as blender. Good thing - the Japanese luthiers has the same tidiness as the Germans =)
I´ve ordered one blender pot and has filled up the hole.
After that a thick coat of filler and first coat of primer.
At a closer look there were some gaps – no need to worry I have sanding paper for ages =)
Sanded down to the gaps filled it and after drying for another day, and a few minutes of sanding looks quite well. Even with the fingernail I can’t feel any gap.
Reply With Quote
