Thank you McCreed.Originally Posted by McCreed
I like the way you think!!!
Just a side note, not sure if you've tried to steam out that dent yet, but if not, you'll want to do it before any more staining.
Because the repair process requires a damp rag, it will lift the stain out the area of the dent when the heat is applied.
Whilst doing a touch-up with stain after is doable, you run the risk of not getting good colour balance between the repair area and the "background" colour IYKWIM.
I did have a go at steaming out the dent before the second coat. I did some research and found that I probably needed to do it for a bit longer. Some were saying to lift the iron on and off for about 15 minutes. I probably only did it for 5. It did make a massive improvement and the dent is less visible and you can barely feel it.
I think I'll give it another steam before the final stain coat goes on.
Reply With Quote
