Results 1 to 10 of 13

Thread: Help for Set Neck Removal

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #12
    GAStronomist Simon Barden's Avatar
    Join Date
    Oct 2016
    Location
    Reading, UK
    Posts
    10,547
    The Schaller roller bridges come as standard with posts with M5 threads that are too small for the kit (and a lot of other) post inserts, which have M8 threads. But Schaller do sell M8 posts for the bridge separately. I’ve got a roller bridge and the posts on order direct from Schaller to try out on my ES-3 to try and cure my bridge buzzing issues. It is about the lowest height bridge you can get, and it should end up as low as my modified Nashville if I’ve measured correctly, and I can sort out any string spacing issues at the same time. The gold plated version isn’t cheap though, almost as much as the kit cost, so it better solve my bridge problems!

    Here are the M8 studs for the STM bridge on the Schaller website: https://schaller.info/en/replacement...umber=22280100

  2. Liked by: HarmonIser

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •