Well done! It was quite a complicated scheme to wire all at once, especially for someone not used to doing it. Glad it's all working.
And don't forget, you've still got 3 of WeirdBits other wiring schemes to try!
Yes, conductive paint is a bit harder to track down a short on, as it's got a higher resistance than copper shielding tape, so you get less signal, not total silence.
Hi all, looking for something similar, but minus the three way pickup selector switch, I want to be able to "blend" each of the three pickups, with 0 being quiet, 10 full blast. This is a Telemaster with three Bill Lawrence XL Soapbars, three concentric pots, three on/on/on toggles (one for each pickup), ZERO pickup selector toggles.
So independent volume/tone concentric pot and one three way switch per pickup, then straight out. The idea is to keep it as simple as possible for each pickup. I'm overthinking it, I'm sure, it seems so straightforward, but after seeing another post about independent volume vs. otherwise, my brain shut down. The diagrams within this thread are close, but I just need a fresh perspective. Thank all, great resource here!
Posting Permissions
Reply With Quote