1st Build IC-1

[grahamjohnston80]

I'm on the Central Coast of NSW which has a very similar climate to Perth. Almost on opposite sides of the island. We are also going into summer so hopefully that will help with drying.

[grahamjohnston80]

Hi Folks,

Quick question about sanding.
I'm reading conflicting information about sanding grits.
The Pit-Bull guide says to start at 120-180 but not to sand beyond 220grit to leave some tooth for the finish.
The Dingotone instruction pdf says to sand to 240grit.
The Dingotone video says to go to 400grit.

Any advice is appreciated as always or is it just a case of 'see how it feels/every kit is different?

The body on my kit is mahogany with white binding and I'm finishing with Dingotone Kajirini red.

Cheers,

Graham