Hi,
Doing a mock build, i realised that the nut is mounted upside down (don't know if that shows in the picture).
Is it easy to get it off and reglue it correctly?
Also, when i put the neck flush in its pocket, the pickup won't fit in.
If i want the pickup to not touch the body or the neck (picture) then i barely get my scale length on the high E side.
Note that I'm already at what the predrilled string hole allows me to be
Is it gonna be a problem for intonation?
Lastly, pickups cavities are really shallow and wire holes are poorly placed.
The bridge pickup with its wire plus the neck stand out a lot.
I think that's all. I don't know what to think...
Cavities and holes are doable.
The nut... tricky but still doable.
And for the scale length i just don't know.
Thanks for letting me know what you guys would do in the same situation.
Reply With Quote