Hmmmmm. Basic set-up done except for intonation. But the pickup is too far from the strings. Need a pickup shim as it's a dogear. I've raised the pole pieces up by about 3mm but not a huge improvement. Sounds more like a twangy tele than a ballsy P90 Jr. Could be the Artec pickup as it reads a bit under strength at 7.2k and is supposed to be 9k-ish. I'm sure its the same as the Vanson one (which would be a re-badged Artec) as the written specs are identical. But first the coil needs raising up closer to the strings. Temporary cardboard shims will be fitted to see if that improves things (just though of temporary shims whilst typing so haven't done it yet). Tone pot (CTS) needs replacing as it works OK but it's not got a smooth travel and is quite stiff in a couple of places.