Results 1 to 10 of 62

Thread: First build: GS-2Q (also featuring EX-1 custom)

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    May 2019
    Location
    US
    Posts
    105
    Perhaps not the most elegant neck rest.




    Color is basically perfect. Exactly what I wanted. Doesn't quite come through in pictures because my cheap phone camera isn't very good. Still needs some more coats but it's getting there, just started building up gloss in the last couple. Probably going to put coats on every couple hours until I go to bed tonight, and then let it sit for a month or so.

    Probably could have handled the grain filler better.

    I noticed the same issue as in the other GS-2Q thread that popped up, the bridge ground wire hole isn't drilled. So that will need to be done.
    Last edited by Chaosblade; 14-07-2020 at 02:30 AM.
    1. GS-2Q
    2. EXM-1 custom
    3. GMS-7F

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •