2nd Build 335

[phrozin]

Wish me luck....

You should have glued the neck in before you primed it on those hollow bodys when your painting them getting the paint off the binding can be a real pain I use a 3mm and 6mm fine line tape on them, when you remove a masking tape or scraping the binding makes a real mess. Fine line tape isn't expensive and it's a lot better for going around a bend, make sure you're using a high build primer and feather it towards the edge of the binding, if you aren't good at painting take your time and before you shoot the primer give a couple of coats of etch primer it works great as a sealer

3mm fine line tape press herel

6mm fine line tape press here

Mark