Pickup Winding

[Woltz]

So I was given an USB Oscilloscope as an early B'Day gift. I picked up a cheap signal generator off eBay (which initially didn't work, the IC was stuffed, but got a new IC from Jaycar and it started working straight away).

Set up to test inductance of the Tonerider TRT1 Neck Pickup which measures:

6.62k
2.27H





It's a bit of a mess of wires but essentially it is set up to create a Lissajous Figure.

Here is a link for anyone interested: https://www.syscompdesign.com/wp-con...ar-pickups.pdf

Once I've wound a driver coil I'll set everything up to try to find the resonant peak. Unfortunately this cheap oscilloscope and signal generator combo means that I don't have a bode plotter so I'll have to look at the signal instead as I vary the frequency on the signal generator.