Hey Bossdogs, welcome along!

TL and ST kits are your simplest builds, depending on how fancy you want to get with your finishing. The basic TL kits and the DTL kits are probably the best for a first build.

I’d think twice about getting one of the veneered kits, as they can present some issues with glue spots and the veneers are very thin and easily sanded through.

The only caveat to that is, that when you get your kit, do a mock build and check both your neck alignment and your scale length. From time to time there have been issues with the bridge rout position being too far back. It doesn’t happen often but it does happen.

Check evethhing over and if there are any issues, notify Adam at Pitbull straight away. They will usually sort something out really quickly if there are issues.

other than that, there is just the normal mantra, “Sand sand sand and when you think you’ve sanded enough, sand some more”.
Start a build diary, post as many photos as you can and every question that pops up, the only silly question is the one you didn’t ask before doing something that makes you swear.

best of luck, the hardest decision is usually which kit to buy first!