Kirk’s ST-1 Ash Build

[McCreed]

Good work Kirk!

But the perspectives of those photos are just doing my head in! Please... no more upside down left side right pics!

[jugglindan]

Good work Kirk!

But the perspectives of those photos are just doing my head in! Please... no more upside down left side right pics!

Doesn't everyone hang their guitar from the ceilingwalls?

[Retroman33]

I’m loading them right off my phone right way up. Then when I post they all are flipping on me! May need to find a hosting site soon.

[Retroman33]

Ok,
Found quite a few spots where wood grain waves were noticable. So I sanded back with 100 something or other and 240 and 300 something or other sandpaper. Nearly took it all the way back so that I would have all the grain filled. Didn’t take an upside down or sideways picture for that.

I’ve then second coated SCA Primer Filler with better results all around. Still need more attention getting one line of machining out and a couple spots of grain waves.

Here’s some pics in random orientations.

[jugglindan]

Phones can write data into the photo indicating what the phone orientation was when the photo was taken. Software that understands and pays attention to that data can then make sure the photo is shown the right way up. This is why photos always look the right way around on your phone. But the forum software doesn't check the EXIF tags (which store the information), so photos may look wrong. A hosting site will only help if the hosting site does the rotation based on the EXIF tag data. Another way around this is to only take photos of your build with the phone right side up.