You can see in my Phase 45 thread I made a enclosure jig out of thin MDF. I drilled holes using the enclosure template. It helps hold things steady but also lets me test the template itself - are the pots close but not too close etc.
You can see in my Phase 45 thread I made a enclosure jig out of thin MDF. I drilled holes using the enclosure template. It helps hold things steady but also lets me test the template itself - are the pots close but not too close etc.
Mantra: No more pedals, must finish BlueyCaster...
Disclaimer: I haven't done woodwork since high school, and wasn't really paying attention at the time ...
Reply With Quote
