Aion Electronics Gale Pedal

[Woltz]

No question about customer service. I've always been happy with their staff. I bought my SG and Marshall DSL there and I've bought my strings, accessories for other instruments and sheet music from there as well.

Sent from my SM-G960F using Tapatalk

[Woltz]

Boards all done, did a quick wire up to the sockets so that I can test. I'll tidy up the wiring once the enclosure gets here and I do a test fit.



And here's the messy test setup.



What did I play you might ask? Well, what do you play with a SG, a Marshall and a Schaffer Replica? AC/DC of course.

Sent from my SM-G960F using Tapatalk

[Woltz]

Struggling to come up with a graphic for the pedal. This is what I have at the moment.

[Andy40]

Tidy work there Woltz

[jugglindan]

Artwork looks good. How do you apply it? Colour decal? Screenprint?

Sent from my moto g(7) using Tapatalk

[Woltz]

I can't claim the artwork as mine. I grabbed the cartoon off the net and used illustrator to layout the pedal with the text. I'm thinking opaque water decal with clear coat or epoxy over the top but I need to research more.

Sent from my SM-G960F using Tapatalk

[jugglindan]

I don't make my own drawings either. I just grab stuff online and mash them up in Inkscape. I don't have a colour printer, so all my decals are in black.

I have used SCA clear over decals. When I used it over acrylic lacquer paint it worked great, but it did not adhere to a powder coated enclosure.

Sent from my moto g(7) using Tapatalk

[Simon Barden]

Either it's a very big box or you'll be using very small knobs. If not, you might want to think about moving the text so it doesn't get obscured.

[Woltz]

Either it's a very big box or you'll be using very small knobs. If not, you might want to think about moving the text so it doesn't get obscured.

Yeh the dots are just marking the location to drill. I'll do a test print on paper first to confirm there is no issues.

Sent from my SM-G960F using Tapatalk

[Woltz]

Couldn't be bothered waiting for warm weather to do the decal on the enclosure. I just decided to box it so I can use it because I have other projects that I want to put time into.



Just a cheeky bit of masking tape for labels at the moment.



Sent from my SM-G960F using Tapatalk