Thanks Mick,

I pretty much figured out what I needed to do (I'm 'handy' enough to manage it, no problems), just need to get the auger bit.

I wasn't sure if I could safely run the neck pup wire with the bridge pup wire to the control cavity(from the bridge pocket) without risking any 'noise' between the wires.

An alternative I considered was to rout a shallow channel from the neck pocket to the control pocket and run the wire along there. This would hide the wire under the pick guard nicely also. Given the control pocket cover meets the pick guard nicely, it would all be hidden.

Off to Bunnings this arvo to grab the auger bit. I'll let Adam know either way.
Cheers
Fipsy