Hi, Thanks for your reply.

It seemed like by raising the saddles a bit more (which there actually was still room to do) most of the buzzing was removed which is good. With the truss rod, when turning anti clockwise it just seems to loosen the nut, and turning it the other way still tightens it. What do you do in regards to the fret level?

Is starting to feel okay around the middle and higher frets in terms of the action, but yeah the first few frets is where the action seems high. The nut slots themselves don’t seem deep at all. I do have a small set of the welding torch tip cleaners which supposedly work as nut files. They seem to match up in sizes with the nut slots. Just looking on how I can do this without ruining the nut by filing too much or something.

Thanks.