Aion Electronics Aurora Pedal

[Woltz]

Either a 5F1 Champ or a 5E3 Deluxe is the go. The 5F1 will set you back about $500 - $600 in parts and the 5E3 will set you back about $1000 in parts.

......As long as you have a reverb pedal. I need the verb. I built my reverb pedal and I love it. It was the Moodring from MadBead Pedals.

I just priced up all the parts for a 5E3 and if I was to get almost everything from Evatco it comes in just under $800 for everything except the cabinet which I'd make myself. Shopping around may save a few $$ here or there and making the Chassis would also save some $$.

Just in case anyone else is following this thread and is interested, here is a rough breakdown not including a cabinet:

Speaker - $127.95
Power Transformer - $169
Output Transformer - $89
Chassis - $80

Tubes - $139.40
(2 x 6V6 Power Tube - $68
5Y3 Rectifier Tube - $29.95
12AX7 Preamp Tube - $18.50
12AY7 Preamp Tube - $22.95)

Resistors - $2.65
Caps - $65.56
Everything else - $126.97