Quote Originally Posted by McCreed View Post

If measuring the way I just described, and you can get the E1 (treble) saddle's break point between 648 - 651mm from the nut (with the intonation screw just flush with the saddle slot end) you should be fine to get proper intonation. The E1 is always going to be the closest to the nut) and typically the E6 (bass) is the furthest.
Alright, I measured in this method and the was able to get 650 on the treble E1, with the saddle hanging on by a few threads. Same on the bass side, which leads me to believe I may have actually put the bridge on straight! haha.