Finished the wet sand and polish. Only done by hand so not the best job but still looks decent. Now for my next hurdle that I didn't foresee.
Never done one like this before with all the pickups and knobs mounted on the pickguard but still needing to route the wiring through drill holes in the body. Makes for a very awkward soldering job because I need to balance the pickguard near the body while doing all the soldering so I don't have a crapload of cable to bundle back into the cavities. As much as I hate the idea, might be worth doing this with plug-in connectors so I can solder it all and route cables through, then just connect the plugs just before I mount the pick-guard.
Reply With Quote