Hi Scott. Thanks for getting back to me. I took a closer look at the mini switch wiring this morning and was able to see that the red and black wires had been bridged by some excess solder ( there’s not a lot of real estate to work with there) so the pickup was basically in series in both the up and down positions and shorted in the middle position. Once I broke the excess solder joint the 3 switch positions seem to be working as intended, with the series position sounding clearly louder and fuller than the other 2. Now I just have to figure out why my volume pot is acting like a tone pot and my tone pot doesn’t do anything .
Anyway, thanks for responding to my post so quickly.
Rick
P.S. I’m new to this this forum and don’t know how to post pictures. Is there a simple way to do it?