Bare bones no upgrades PBG build. Maybe?

[ozzbike]

I always add some insulating tape on top of the copper where the pots lugs will sit, just in case.


That way if it stops working when you install it you know it can’t be a lug shorting.

Also, if it is the stock barrel socket they can be a little tricky, the lugs don’t typically connect the expected way. There are a couple of threads on it from a ways back.

That internal cavity is smooth.....mine has four recesses for the pots....not wide enough....so the pots hit the wood.....but tape and positioning may have things going well now.