Quote Originally Posted by FrankenWashie View Post
Factory did a great job on that body, it seems like it is only a 2 piece, the grain structure really matches up well.
I look forward to seeing where yours ends up! I'm still trying to manufacture a wider than normal radius block for the fretboard!
It is actually four piece...but really well done.

I have filed out the jack socket so the barrel actually fits....but mine is not long enough to really put the nut on...may have to do something else.

My effort at the control cavity cover recess is not as smooth as yours....but it does the job.

I made my neck joint a lot more gradual and tapered than the sudden change at the neck joint.

Bit embarrassed at my finish at the moment....hmmmm....letting it hang whilst I go back to work.

Will see what I have when get back home.

Golden teak inner...jarrah around the edge and mahogany stain inside the jarrah between that and the golden teak.

Due to the heat here today...the body has had four coats of Fine Buffing Oil and is bone dry....wow.

I have done one coat of Tru Oil on the neck....will put the decals on after working week is done. Then decide if I continue with Tru Oil or do the neck with Buffing Oil and wax.