I discovered when placing the 2 bridge mounting screws on the 2 end holes from the original bridge,
the scale length is still a few mm too long.
So...dowelled them up and re-positioned closer to the neck.
Click image for larger version. 

Name:	11.jpg 
Views:	1222 
Size:	336.9 KB 
ID:	33621
It now sits thus...
Click image for larger version. 

Name:	12.jpg 
Views:	1192 
Size:	333.1 KB 
ID:	33622

Next is to screw the centre block.
As I'm using '10' guage strings I only need one spring for the 'up' bends.
Click image for larger version. 

Name:	13.jpg 
Views:	1245 
Size:	283.7 KB 
ID:	33623

Now I have to put all the electrics back in and solder a ground wire.

cheers, Mark.