Well after the mishap when doing to decal on the headstock I was planning to order some more paint to redo the face of the headstock. But prior to doing that I started wet sanding the body with 1000 grit and all was going well until I managed to sand through the clear on the side somewhere on the lower horn so obviously that didn't get anywhere near enough clear coat in that spot. And at this point I'm done with this build, I've reached my limit. So without doing anything else on the finish I just assembled it, wired it up and strung it up. Here it is in it's crappy state without polishing the body and not having anything on the face of the headstock. Maybe I'll revisit it in future and have another go at the finish.