Based on pulling the odd pbg neck apart,Originally Posted by McCreed
Agreed, but from I what I just learnt about dual action TR's, the bottom of the rod is not fixed but just threads into a another "nut".
Theoretically the round rod of the assembly could be unscrewed and actually extracted from the neck. (not that I'd try it)
That said, I'd be dubious about nut & rod threads that have enough play in them that they would vibrate loose from transport.
I suppose once tensioned by the strings, it may not be an issue again.
The dual rod is a flat bar with square nuts welded at each end. One nut is RH thread and the other LH thread. The only way this moved that far out is if the whole rod moved as a unit in the channel.
Once some adjustment is made to the rod it’ll sit solid. It’s a concern that it was able to move that far from factory.
Sent from my iPhone using Tapatalk
Reply With Quote
