I have started finishing the body of the guitar. I started with a few coats of danish oil and was happy with the colour that was achieved. I will be applying a few coats of some wipe on poly to the guitar. I am working in a small tin shed and have noticed that lots of dust is settling on the guitar body in between coats. I have been using a tack cloth to get the dust of the top but some small spots have dried in. What is the best approach to dealing with this?
I will be attempting to straighten out the neck of the guitar today at some point and may apply some wipe on poly to this too. It seems I will need to do a full level as the frets are all over the place in regards to hight. Anyone have any tips on the neck straightness. I am assuming this is a critical point in playability and needs to be dead on for fret leveling.