Quote Originally Posted by king casey View Post
I wouldn't stop at the neck holes, but you probably already knew that.
cheers, Mark.
Something has gone wrong, the neck has moved. I couldn’t get the drill into the holes as the clamp was in the way. I put a drill bit in the body where the neck sits and dot punched. I then had to take the neck off and drill the holes.
I’ve put everything back together and the stings do not line up. Not happy now and not sure where to go. I’m not sure if it’s the bridge or the neck.
Should I take the whole thing apart and dowel the neck and start again?



Sent from my iPhone using Tapatalk