Yep, I don't actually like G style ones to play on much either so that makes the decision easier. My templates are for a 24 fret F style, going a bit stir crazy wanting to get into that build but low on $ atm.
I'll probably grab some pine from the BGS so I can have a play with the routers/templates on the weekend.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Yeh the Yaka bookmatch is real nice. Almost seems a shame to use it on a piece of eucalyptus.Originally Posted by Andy40
Ohh man, this is like wood porn
I agree, the addition of scarf joint etc. does add extra complexity that requires care. I'll do a f style first, I've just been trying to find a good reference/plan for a tele neck with dual action rod and headstock adjustment.
Yeh I have some offcuts from the tas oak that I'm thinking of having a play around with making a neck before I invest in some better wood. I was toying with the idea of a flame sheoak fingerboard for the neck for this guitar but that might be a little bit too much going on with the figured top as well.
Build #1 - TLA-1Q
Build #2 - Scratch Thinline Tele
Build #3 - Scratch Rickenbacker 330/12
Build #4 - Scratch All Aussie Timber Strat
Build #5 - 1st Violin/Fiddle
Pedal Build #1 - Aion Gale
Pedal Build #2 - Aion Aurora
If you did go with the Tas Oak, I’d take a neck sized blank, saw it into three strips width ways, and reverse the Center one then laminate the three together. It will make the neck more stable. (I know it’s only a test neck, but it’s good practice, especially if the test pieces are slab sawn)
Tas oak has a tendency to splinter and chip out so your router bits will need to be sharp as all get out. Take multiple shallow passes.
i look forward to the updates!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Posting Permissions
Reply With Quote