This afternoon I continued work on the kit. I sanded the second coat of grain filler with 320 grit again, taking care to apply pressure over a decent sized area. I had some trouble with the carved top tough. I used an old sanding sponge as a block, however it was quite stiff and due to that it was hard to sand in the spots where the body carved. As a result I had to sand those spots without the block, which was a pain. The 3M sandpaper I'm using is awesome, however it is really flexible causing it to be quite hard to sand without something like a block behind it.



Next thing to figure out: Should I do an oil finish or something like a semi-transparant cherry red paint job. I'm afraid sparkle is going to be to difficult for me on this kit. I'll probably try to use glitter when I refinish my first kit or my cheap bass guitar.