GS-1sf 1st build - Cocoa

[BuffaloGhost]

Ok remask Ed and sanded and sorted out the side bleeds. There are still some tiny errors but I can live with them.

Need to cut back the top at some point but once it’s real hardened up so I’ll stick all the stuff on in the meantime.

Tried a test colour match on the gold hardware x x






Sent from my iPhone using Tapatalk

[phrozin]

Ok remask Ed and sanded and sorted out the side bleeds. There are still some tiny errors but I can live with them.

Need to cut back the top at some point but once it’s real hardened up so I’ll stick all the stuff on in the meantime.

Tried a test colour match on the gold hardware x x






Sent from my iPhone using Tapatalk

you could have spent a bit more time blocking the paint a bit more to flatten it, my advice to everyone who does a paint or clear getting a 3m color sanding block or what i use i make all my sanding blocks i use a 10mm self adhesive eva foam on a 40mm wide piece of wood long as i need the flatter you get the paint the better it shines and looks a lot better a great paint job is in the prep work😀