GS-1sf 1st build - Cocoa

[BuffaloGhost]

I'd say that ground connection on the back of the main tone pot looks rather 'blobby' and may cause problems later. If the solder doesn't flow away smoothly over the top of the pot, rather than bunch itself up on top, then the joint wasn't hot enough to melt the solder properly.

Thanks for the tip. I’ll get the iron hotter and smooth it about. Especially when it comes to the bridge vol which seems to have EVERYTHING grounding to it.


Sent from my iPhone using Tapatalk

[BuffaloGhost]

Thanks for the tip. I’ll get the iron hotter and smooth it about. Especially when it comes to the bridge vol which seems to have EVERYTHING grounding to it.


Sent from my iPhone using Tapatalk

any better? I managed to get it really flat and smoothed out on the other pots



Sent from my iPhone using Tapatalk