Aha! Removed the shim from under the nut and replaced it with a short piece of thick neck just under the low E. Seems just about right! This lets the high E end sit lower.
Backed the strings off and got the bridge level and blocked it there with my $1. 12mm tremblock. 5x 20c coins taped together. And backed the springs off.
Retuned.
Re intonated.
Re tensioned the springs until the coins dropped out.
Bridge still level.
Actually did a little retune using the spring tension.
Locked the nut.
And a final fine tune with the adjusters.
Maybe took 20-30 mins.
Was looking like firewood two nights ago. Loving it now.
Oh... And the TL-1 arrived today too!
Sent from my D6653 using Tapatalk
Reply With Quote