Quote Originally Posted by Simon Barden View Post
I would try fitting the pickups in the routs. Whilst they will normally fill them fairly well, you may have enough of a gap around the edges so that you can see the light wood of the sides of the rout, which will show up against the dark stain. So you might want to think about staining the sides of the pickup routs, just in case.
Actually I plan to set coppertape in to pickup routs. Not sure if I set orginal humbuckers or should I test my Tesla pickups. Those are little bit smaller so I need to figure out somethin pickup cover if I choose use Tesla mics. Of course I can do that pickup cover eather way. We'll see.

Lähetetty minun SM-N950F laitteesta Tapatalkilla