Time to fit the control cavity cover.

I've noticed that on some high end guitar's they use little brass inserts in the wood instead of screwing directly into it. This is way overkill on this guitar but i imagine it would be handy for people running active electronics and have to change batteries. I ended up getting like 50 from eBay for $8.50 so they'll probably get some use on future builds too.





Some stainless M3 5MM screws





Where I'm up to now:





What's left to do:
Fit strap buttons
Buy a case
Change the strings to a heavier gauge before final sanding of the nut. I've been playing a strat with 12's lately. 10's on this feel loose haha