About to start this for the third time. First time I had like a Jazz Bass cut off on full volume...with all knobs rolled on....nothing...roll both volumes back a smidge and nice sound. Thought that was suss.
Second Time...I get nothing at all.....hmmmm.
I have used leads from capacitors to make some extensions for the pins on the push pull pots....I have then soldered wires to these and dropped heatshrink over the whole thing....reckon I have a bad joint in there.
I think I will take the whole assembly out of the cavity...push into the cardboard again...extend all the wires and make the whole thing external to the body and keep checking until I get it all to work.
Reply With Quote