Hey mark, With this kit the earth wire is soldered onto the spring claw, no need to pull out the posts.
And, yep push the receivers in flush. The bridge pivots on the bit past the thread. I'll throw up a photo of how mine ended up.
Hey mark, With this kit the earth wire is soldered onto the spring claw, no need to pull out the posts.
And, yep push the receivers in flush. The bridge pivots on the bit past the thread. I'll throw up a photo of how mine ended up.
Last edited by Sonic Mountain; 18-09-2018 at 09:39 AM.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Hi Marc,Originally Posted by Sonic Mountain
The best thing with the earth wire is to solder to the spring claw as Sonic said.
Posting Permissions
Reply With Quote