When I saw the off centre veneer I've been thinking about removing the whole thing and adding a bevel all around the front and back. I prefer a round edge on a guitar anyway. The issue is that the plate for the input goes a little bit over the binding, so if I remove the binding the plate is not going to fit. Gonna have to have a think. Maybe I can find a different input.
I cut out some back plates today. They are okay. The round one came out a bit oval so it might need a bit more work.
On a positive note, a package arrived from pb today with a straight edge and fret rocker so I can have a crack at doing a better set up of my previous build.
Reply With Quote