Waz's MMB-4

[ozzbike]

G'day Ozzie, everything is earthed to the volume pot.
Stacked blend pot wasn't doing much on coil splits and as you heard with the dpdt mini switch there isn't much happening with one of them either, just more noticeable than using blend that came with the pre amp.

Sent from my SM-A520F using Tapatalk

All is good. I hope you get the outcome you want.

(Thanks for the wetsanding advice 1200 levelled up nicely. Nice full strength coat over it and those little holes are gorrrnnnn.)

Thanks. 😎

[wazkelly]

All is good. I hope you get the outcome you want.

(Thanks for the wetsanding advice 1200 levelled up nicely. Nice full strength coat over it and those little holes are gorrrnnnn.)

Thanks. 😎

Good to hear Ozzie.

Do you have any 1500 or 2000 as I have some spare if you need it.

[ozzbike]

Good to hear Ozzie.

Do you have any 1500 or 2000 as I have some spare if you need it.

I have both 1500 and 2000...and I have the micro mesh pads from the sandpaper man.

Thanks though.

[wazkelly]

I have both 1500 and 2000...and I have the micro mesh pads from the sandpaper man.

Thanks though.

All good then. Maybe one more 1200 wet sand after 4 more coats then move up to 1500 should start to bring it home.